CUTE OCTOPUS - PERSONAL-USE PRINT GUIDEINCLUDED VARIANTS

1. Magnet

   • colored 3MF
   • one-piece STL
   • separated-eye body STL

2. Keychain

   • colored 3MF
   • one-piece STL
   • separated-eye body STL

3. Figurine

   • colored 3MF
   • one-piece STL
   • separated-eye body STL

4. Shared eyes

   • STL and 3MF containing two eye inserts

APPROXIMATE SIZES AT 100%

Magnet: 55.59 x 27.84 x 42.29 mmKeychain: 56.12 x 55.84 x 42.95 mmFigurine: 56.12 x 55.84 x 42.29 mmEyes: 15.42 x 7.05 x 5.22 mm (two closed inserts)

RECOMMENDED FDM SETTINGS

Material: PLA or PLA+Nozzle: 0.4 mmLayer height: 0.16-0.20 mmWalls/perimeters: 3Top/bottom layers: 4Infill: 10-15%Supports: OFF (the supplied reference describes the models as support-free)Brim: Usually OFF; add a small brim only if adhesion is weakScale: 100%, especially when using separate eye inserts

MULTICOLOR OPTIONS

• For an AMS/MMU system, use the supplied colored 3MF for the chosen variant.
• For separate eye inserts, import the matching separated-eye body STL and theshared eyes STL as parts of one assembly. Preserve their original positions;do not auto-arrange them before confirming alignment.
• A one-piece STL can be printed in one color and painted afterward.

MAGNET NOTES

The source PDF mentions a separate magnet README, but that README was notpresent in the supplied ZIP. Confirm the magnet cavity dimensions in yourslicer before buying or installing a magnet. Use suitable adhesive and let itcure fully. Magnets are dangerous if swallowed; keep them away from childrenand pets.

MODEL QA

All seven supplied STL files were checked. Each body is a single closed,watertight mesh with zero non-manifold edges. The shared eyes STL contains twoclosed, watertight components. Original geometry and file bytes were preserved.

LICENSE / USAGE

The supplied reference document states that the model is for personal,non-commercial use only and prohibits sharing, redistributing, selling,sub-licensing, hosting, or remixing the digital files and derivatives. Sellingphysical prints also requires the creator's active commercial license. Thisorganized package is for the recipient's private printing workflow only.